- 1 SFS DV Relocation hose. This replac…
-
| - 2 I removed the battery and battery bo…
-
| - 3 Closeup of 5 Battery Box Mounting ho…
-
| - 4 Hoses removed (and replaced with sil…
-
|
- 5 Hoses Removed from DV and N75.
-
| - 6 DV hoses removed shown connected to …
-
| - 7 DV & N75 hoses removed.
-
| - 8 SFS 25mm "riser". I cut 2-7/8" off …
-
|
- 9 New hose installed. I trimmed 1-1/8…
-
| - 10 Battery reinstalled. DV "riser" hos…
-
| - 11 Everything back together for now. W…
-
| - 12 GReddy RS BOV new in the box.
-
|
- 13 What's going on in California?
-
| - 14 GReddy anatomy. Photo courtesy of M…
-
| - 15 GReddy BOV on left compared to OE 71…
-
| - 16 My Hyperboost DV on left compared to…
-
|
- 17 GReddy adapters used to convert it f…
-
| - 18 GReddy with adapters installed. It …
-
| - 19 GReddy with adapters installed.
-
| - 20 Hose routing for GReddy DV and N75.
-
|
- 21 Hose routing close-up.
-
| - 22 Top of GReddy and springs have been …
-
| - 23 Top Removed so I could remove the in…
-
| - 24 Both springs exposed. I removed inn…
-
|
- 25 Inner spring removed. Top reinstall…
-
| | - 27 I used this part to connect the 25mm…
-
| |
- 29 GReddy DV install now completed.
-
| - 30 Pressure Test set up to check for an…
-
| - 31 Close-up of pressure test ready to g…
-
| - 32 Vacuum Line to DV. Edging installed…
-
|
- 33 Finished. GReddy DV sits lower than…
-
| | - 35 I decided I wasn't finished. I re-p…
-
| - 36 Re-plumbed hose from GReddy DV back …
-
|
- 37 Re-plumbed hose from GReddy DV back …
-
| | | |
| |
Add to friends 
My friend 
