Fire Extinguisher bracket fabricated and mounted in the MK1 Audi TT.

Tools recommended:
- T-30 Torx driver (to remove 2 - OE bottom bolts on Knee Brace)
- Dremel with cutting blade and sanding wheel
- Drill and 15/64" bit
- 5mm allen wrench or socket
- 10mm wrench or socket

Supplies recommended:
- 1: 1/16" thick Aluminum sheet, 13.5" long x 4" wide
- 1: 90-degree 1/16" thick Aluminum, 15.75" long and 1.5" wide each side
- 2: 6mm x 1.00 bolts, 30mm long
- 4: 6mm x 1.00 bolts, 12mm long
- 6: Stainless Washers
- 4: 6mm x 1.00 lock nuts
- 1: Fire Extinguisher (model appropriate for automotive use)
- 1: Vinyl door-edge self-adhering Molding, approx. 22" long