FOTKI

Blue TTop

rss

A total of 5 Grounding Cables were made and installed.

Cables were installed in following locations:
1. Right Fender to Engine
2. Engine to Throttle Body
3. Engine to Transmission
4. Transmission to Negative Battery Terminal
5. Negative Battery Terminal to Left Fender

An excellent write-up by MCPaudiTT, including the making and tinning of cables, can be found here - http://public.fotki.com/mcphill/audi_stuff/interior_non-lighting/grounding_mod/

Parts can be found here at Parts Express.com - http://www.partsexpress.com/pe/pshowdetl.cfm?&DID=7&Partnumber=263-645

| Invite

1 A total of 10 4-AWG Crimp Ring Termi…	2 A close-up of the package with part …	3 Type of wire cutter needed for the 4…	4 Crimper tool used to connect the ter…
5 Close-up of crimper with terminal re…	6 Grounding Cables. Picture courtesy …	7 Left Fender to Valve Cover	8 Right Fender
9 Throttle Body to Engine	10 Valve Cover to Trans	11 8mm blank spot on transmission.	12 Close up or 8mm blank spot on transm…
13 8mm bolt used for black spot on tran…	14 Transmission	15 Trans to Battery	16 Battery to Left Fender
17 Left Fender	18 Valve Cover