Public Home > Audi TT Modifications > LCR Splitter > A dremel was used to grind off the raised par…

LCR Splitter

OEM front splitter for Seat Leon Cupra R (Part # 1ML 805 903 ) installed on TT

WARNING: Do NOT purchase this item from any company with the name "GOINGFAST"!

I recommentd purchase here -

All Stainless Steel hardware used:
- 2 M6 x 1.00 SS hex-head bolts 35-40mm long - for center supports
- 8 M6 x 1.00 SS hex-head bolts 16-20mm long
- 20 SS 6mm flat washers
- 10 SS 6mm lock washers
- 10 SS 6mm x 1.00 nuts
NOTE: Self Tapping SS screws can be used in place of above list.

Tools needed:
- Drill and 6mm drill bit (15/64" will work) for drilling holes in splitter and bumper
- 10mm wrench and 10mm deep socket
- Painters Tape
- Ruler
- Dremel with grinding / sanding tip

Blue TTop

A dremel was used to grind off the raised part of every tab. 6mm holes were drilled through center supports and every other tab.

Image URL for use on other sites:
Link to send via email/instant messenger:
Fotki Code:
Code for HTML page:
Code for forums:
Taken: July 25, 2007
Uploaded: July 26, 2007
Captured with:
Sony DSC-P200