OEM front splitter for Seat Leon Cupra R (Part # 1ML 805 903 ) installed on TT
WARNING: Do NOT purchase this item from any company with the name "GOINGFAST"!
I recommentd purchase here - http://oempl.us/index.php?main_page=product_info&products_id=64
All Stainless Steel hardware used:
- 2 M6 x 1.00 SS hex-head bolts 35-40mm long - for center supports
- 8 M6 x 1.00 SS hex-head bolts 16-20mm long
- 20 SS 6mm flat washers
- 10 SS 6mm lock washers
- 10 SS 6mm x 1.00 nuts
NOTE: Self Tapping SS screws can be used in place of above list.
- Drill and 6mm drill bit (15/64" will work) for drilling holes in splitter and bumper
- 10mm wrench and 10mm deep socket
- Painters Tape
- Dremel with grinding / sanding tip
No comments yet. Be the first to leave a comment!