english

Bill Geary Jr. Premium Fotki Member

1964 GTO project

Pics of in progress 1964 GTO Convertible model

       
    
    
Slideshow | Invite
GTO Dash
25 GTO Dash
 
Right front window
26 Right front window
 
inner door panel
27 inner door panel
 
right rear window
28 right rear window
 
halfway down
29 halfway down
 
totally down
30 totally down
 
right side view
31 right side view
 
windows- topupview
32 windows- topupview
 
windowsdown
33 windowsdown
 
windowsup
34 windowsup
 
left door regulatordown
35 left door regulatordown
 
left door regulatorup
36 left door regulatorup
 
seatback test fit
37 seatback test fit
 
door hinge view
38 door hinge view
 
doorjambphoto1
39 doorjambphoto1
 
doorjambphoto2
40 doorjambphoto2
 
Glass pattern was cut using a 3x5 card which was traced with card on the outside of frame.
41 Glass pattern was cut using a 3x5 ca…
 
Pic shows how pattern should fit when looking from outside.
42 Pic shows how pattern should fit whe…
 
Pattern was then laid over sheet acetate and then "traced" using a #11 blade. Then cut out with scissors.
43 Pattern was then laid over sheet ace…
 
5 min. epoxy was used to fasten glass to inside of windshield frame.
44 5 min. epoxy was used to fasten glas…
 
This is how glass should look when epoxy has fully cured. Some alcohol made be needed to 'clean up' the glass after it has fully set.
45 This is how glass should look when e…
Comments: 1
hoodhingeleft
46 hoodhingeleft
Comments: 1
hoodhingeright
47 hoodhingeright
 
dashincar
48 dashincar