Public Home > Motorcycle > motorcycle projects > Motorcycle Lift Installation

Motorcycle Lift Installation

rss
Print all 28 photos for $4.20 | Slideshow | Invite
A piece of 1/8" diamond plate was bolted to the top of the lift to completely cover the pit when closed. This picture shows the "foot operated" hydraulic pump before the conversion to "air over hydraulic"
1
A piece of 1/8" diamond plate was bo…
Order print
 
The origional Buddy Lift was a foot operated hydraulic unit. I converted it to "air over hydraulic". Now my shop compressor does all the work.
2
The origional Buddy Lift was a foot …
Order print
 
This is an adjustable "pressure release" valve. This allows me to control the rate of decent depending on the load. nice!
3
This is an adjustable "pressure rele…
Order print
 
P1010487.JPG
4
P1010487.JPG
Order print
 
Now the low slung sperts car can park right over the lift.
5
Now the low slung sperts car can par…
Order print
 
Thanks for looking!
6
Thanks for looking!
Order print
 
8acf_1_sbol.jpg
7
8acf_1_sbol.jpg
Order print
 
DSC01032.JPG
8
DSC01032.JPG
Order print
 
DSC01034.JPG
9
DSC01034.JPG
Order print
 
Advertise on Fotki
Advertise on Fotki