Public Home > Model Cars > My Models > Home made distributors

Home made distributors

rss
Slideshow | Invite
Cut a piece of 3/32" dia. aluminum tubing 1/8" long and a piece of 1/8" dia. aluminum tubing 1/8" long. ACC the 3/32" tubing inside the 1/8" tubing leaving 1/16" of the 3/32" tubing sticking out.
1
Cut a piece of 3/32" dia. aluminum t…
167 views
 
Cut a piece of 1/16" dia. aluminum tubing about an 1" long. ACC the 1/16" dia. tubing in the 3/32" tubing with the end of the 1/16" dia. tubing flush with the end of the 1/8" dia. tubing
2
Cut a piece of 1/16" dia. aluminum t…
168 views
 
Cut nine pieces of 30 gauge wire, your choice of color, about 2" long. Fold about 1/8" of one wire over onto its self.
3
Cut nine pieces of 30 gauge wire, yo…
154 views
 
Take the wire that was folded over and ACC the folded end into the 1/16 tubing, this is the coil wire. ACC the remaining wire between the 1/16" and 1/8" tubing. I do this in a compass like fashion of N, S, E, W, NE, SW, NW, SE.
4
Take the wire that was folded over a…
204 views
 
Drill a 1/16" dia hole in the engine block. Cut the 1/16" dia tubing to length and ACC it in the hole.
5
Drill a 1/16" dia hole in the engine…
168 views