blackfnTTruck (blackfnTTruck) avatar
Public Home > VTDA Install > While I had the MAF out I decide to cut the l…

VTDA Install

Waited a long time and finally got my VTDA, complete install here. You'll need a phillips head screwdriver, 10mm socket with a long extension, two # 10 screws 3/4 inch long and a #4 allen for the VTDA mounting Bracket.

rss
 

While I had the MAF out I decide to cut the large mounting tabs off.

Image URL for use on other sites:
Link to send via email/instant messenger:
Code for a Fotki Journal:
Added: January 17, 2007
668
Captured with:
Nikon Coolpix L4

exif
advertise
Advertise on Fotki