blackfnTTruck (blackfnTTruck) avatar
Public Home > VTDA Install > Carefully pull the whole unit out. The hardes…

VTDA Install

Waited a long time and finally got my VTDA, complete install here. You'll need a phillips head screwdriver, 10mm socket with a long extension, two # 10 screws 3/4 inch long and a #4 allen for the VTDA mounting Bracket.

rss
 

Carefully pull the whole unit out. The hardest part was pulling the rubber holder out of the bracket shown here. Just give it a good tug.

Image URL for use on other sites:
Link to send via email/instant messenger:
Code for a Fotki Journal:
Added: January 17, 2007
592
advertise
Advertise on Fotki