english

BobK Premium Fotki Member

Crappy spray booth

Couple pic's of my make-shift spray booth in my garage

       
    
    
rss
Slideshow | Invite
exhaust fan venting out one of the garage windows.
1
exhaust fan venting out one of the g…
 
Fan cage viewed here.There is a filter on the inside of the box so the overspray isn't just vented to the outside air.
2
Fan cage viewed here.There is a filt…
 
used 6mil poly as drapes.I used 1"x2" strapping to afix the poly to the ceiling.
3
used 6mil poly as drapes.I used 1"x2…
 
Two 16"x 25" furnace filters used to filter the intake air.
4
Two 16"x 25" furnace filters used to…
 
2nd intake filter
5
2nd intake filter
 
The two Jeep doors I'm working on.
6
The two Jeep doors I'm working on.
 
Here's the exhaust box.
7
Here's the exhaust box.
 
Old furnace fan mounted inside the box. A 20" x 25" furnace filter is used to help filter the overspray from being shot out to the outside.
8
Old furnace fan mounted inside the b…
 
The reason for the crappy spray booth.I'm repainting some Jeep doors
9
The reason for the crappy spray boot…
 
2 coats of primer on here.
10
2 coats of primer on here.
 
Primer and activator used
11
Primer and activator used
 
mix ratio's
12
mix ratio's
 
DSCN7446.JPG
13
DSCN7446.JPG
 
reducer.I was too thick to spray without it.Largest gun tip I have is a 1.8mm
14
reducer.I was too thick to spray wit…
 
wax and grease remover
15
wax and grease remover
 
reading my tech sheet.
16
reading my tech sheet.
 
pouring the primer
17
pouring the primer
 
mix ratio is 4:1:1 Here is the 4 of primer
18
mix ratio is 4:1:1 Here is the 4 of…
 
the "1" of the Activator
19
the "1" of the Activator
 
and the "1" of the reducer
20
and the "1" of the reducer
 
put the mask on as the fumes are a "little" strong.
21
put the mask on as the fumes are a "…
 
used strianers as I pour from the mixing cup to the paint pot.
22
used strianers as I pour from the mi…
 
stir,stir,stir....then stir again
23
stir,stir,stir....then stir again
 
DSCN7456.JPG
24
DSCN7456.JPG