Pictures of my 1998 Chevy Camaro Z28 as it was purchased.

Pictures of my Texas Speed air lid.

Pulled the front grille and emblem off and polished the area underneath. Mesh inserts are coming for the two large holes, and the grille mounting holes may get filled/painted eventually too.

Before and after pictures of the yellowed and cracked passenger side headlight. I wet-sanded with 400, 800, then 1500 grit sandpaper then polished with the Novus 3 step plastic polishing kit from www.SpaDepot.com.

www.SpaDepot.com.

Prepped for the track with 315/35R17 Nitto Drag Radials mounted on Mille Miglia rims, Weld Drag Lites on the front, and most of the interior removed.

Pictures taken after removing the side moldings and Z28 badges, washing with Dawn, using a clay bar, then applying Meguiar's ColorX and two coats of their new NXT Tech Wax.

These pictures were taken about 2 months after applying NXT. I also hadn't washed the car for about 1.5 months until today. No booster products were used, I just washed the car.

My Pacesetter longtube headers arrived today.

My car is filthy in these pictures. Temps were in the teens when these pictures were taken, I'll post more when the car is cleaned up again.

This is the first real wash my car has received since the fall of 2004 due to winter. I also took some close-up photos of the wheels, they really need polishing bad. My Mother's Powerball and PowerMetal polish just arrived in the mail, but my cordless drill died. :(

PowerMetal polish just arrived in the mail, but my cordless drill died. :(

First attempt at polishing my brake calipers and painting the pad brackets.

Polished stainless steel CAMARO inserts from dragonz28 at www.ls1tech.com. Great products at a great price! Look for muffin buster at eBay.

Screen dumps taken using HP Tuners software.

Cleaned and polished, but no tire dressing.

Car is filthy, and one of the studs stripped while test fitting. I'll get some better pics later.

Car is still dirty, but the wheels have been cleaned and polished and I added tire dressing.

This is the first time I've had to re-sand and polish since Round 1.

This is a used grille that I bought from ls1tech.com, it is bent. Took these pictures to send it back for a refund.