Public Home > Mike > Audi TT > Front Wheel Bearing Replacement > Tighten the bolt to pull the bearing out

Front Wheel Bearing Replacement

I used relatively inexpensive tools to remove and replace the front wheel bearings. As is typical on many cars these these days, the old wheel bearings need to be pressed out and the new bearings need to be pressed in. What made this project extra specially fun was the fact that the hex socket of the axle bolt was completely rusted and rounded out with no way to get the a 17mm hex bit into the axle bolt to remove it. Ugh.

 

Tighten the bolt to pull the bearing out

Image URL for use on other sites:
Link to send via email/instant messenger:
Code for a Fotki Journal:
Taken: July 30, 2011
Uploaded: November 25, 2011
318
Captured with:
Olympus FE340,X855,C560

exif